I guarantee this update didn’t drop on Thanksgiving. Photo OP probably hasn’t turned it on since their last BBQ months ago and is just noticing - on Thanksgiving - that an update pushed a while ago that they now need to install to get started.
Pro tip: Start up your electronics a day or two in advance of events, so you can pre-patch anything that needs it.
Source: Former IT guy here, who had to ensure that updates ran at the most convenient times possible for thousands of users. “Patching Tuesday” is an unofficial but well recognized “holiday” for IT folks. It’s not first thing Monday morning, which could throw off the workflow for the week, but it also gives the max amount of time to resolve any issues that patching might cause, so we (hopefully) don’t have to work through the weekend.
Pay attention to when your stuff requires patches. A lot of the time, it’ll pop up on Tuesdays.
Thanks, but i prefer most utilities without wifi and need of patching. Each wifi device is running a full blown OS, for which the (cheapest possible) hardware will start to fail after 5 to 10 years. Experience from a wifi capable HP printer; wifi was the first that failed. Not to talk about never patched security holes.
Source: Former IT guy here, who had to ensure that updates ran at the most convenient times possible for thousands of users.
I used to work at a theater owned by a city. So we used the city’s IT department, and their network. During COVID, live-streaming took off. The city wanted us to install a streaming video package. After a month or two of installing a full video system, we finally get around to testing the stream. Boot up AWS, and it runs fine. We’re streaming in full 4K. Great!
So the show rolls around. It’s Saturday, 7:30pm start time. We start the show… And the stream instantly shits the bed. Like we go from full gigabit upload speed, to less than a single megabit. We’re lucky to get 56kbps speeds. We’re getting one or two frames per second if we’re lucky.
Sunday, we test the stream ahead of time, and it works flawlessly. Show starts, and the upload speed drops to fucking dial up.
Monday morning rolls around, and IT strolls in to check their tickets. Sees a hundred from us, and gives us a call. They run a test on their end. No issues. They run a test on AWS. No issues. They run a test on the fiber backbone between the theater and city hall. No issues. They call the ISP. ISP said they didn’t have any issues over the weekend. IT shrugs, and marks the tickets as solved.
Next weekend, same thing. We’re wondering if IT is automatically throttling us, or if we have a malicious user on the network. We’re asking about QoS, or maybe automatic port control kicking in when the stream starts. Monday rolls around, and IT marks it as solved again.
Third weekend, same thing. This time, the city manager’s office is getting calls from angry patrons who paid for streaming and can’t watch their streams. Monday morning, IT rolls up. They run some more tests, and still can’t find anything wrong. They swear up and down that it’s nothing on their end, and it must be something on ours.
After four months of this back and forth, IT finally admits that they have all of their maintenance tasks to run at 7:30 over the weekend. Every single computer, server, and fucking toaster connected to the city network begins their updates at exactly 7:30. Thousands of city devices, all singularly focused on devouring our upload speeds. Servers run off-site backups. Those backups consume all of the upload speeds for the entire city network. IT refuses to change the time, because “this is what works for us. It’s after city hall closes, so we don’t have any users who are affected. It hasn’t been a problem in the past.”
So nobody was ever in the office and nobody on the team wanted to stay (I’m guessing here) 2.5 hrs after work to actually do any troubleshooting and because it was never a problem during office hours then who cares
Seriously. “Start it a day early” My brother in Christ why does your grill need wifi? Do you get updates when the steak is ready? Can it flip your burger?!
Tuesday is the perfect day for it. Finish up the update on Friday, review it Monday and fix where you probably fucked up something and didn’t notice, push it the next day.
another pro tip from someone else in IT: see that appliance with the digital screen? fuck it. don’t get it. get the old shitty one that’s $800 less that doesn’t have WiFi or non-tactile buttons. you know what doesn’t need firmware updates? a charcoal Weber grill.
I guarantee this update didn’t drop on Thanksgiving. Photo OP probably hasn’t turned it on since their last BBQ months ago and is just noticing - on Thanksgiving - that an update pushed a while ago that they now need to install to get started.
Pro tip: Start up your electronics a day or two in advance of events, so you can pre-patch anything that needs it.
Source: Former IT guy here, who had to ensure that updates ran at the most convenient times possible for thousands of users. “Patching Tuesday” is an unofficial but well recognized “holiday” for IT folks. It’s not first thing Monday morning, which could throw off the workflow for the week, but it also gives the max amount of time to resolve any issues that patching might cause, so we (hopefully) don’t have to work through the weekend.
Pay attention to when your stuff requires patches. A lot of the time, it’ll pop up on Tuesdays.
Thanks, but i prefer most utilities without wifi and need of patching. Each wifi device is running a full blown OS, for which the (cheapest possible) hardware will start to fail after 5 to 10 years. Experience from a wifi capable HP printer; wifi was the first that failed. Not to talk about never patched security holes.
I used to work at a theater owned by a city. So we used the city’s IT department, and their network. During COVID, live-streaming took off. The city wanted us to install a streaming video package. After a month or two of installing a full video system, we finally get around to testing the stream. Boot up AWS, and it runs fine. We’re streaming in full 4K. Great!
So the show rolls around. It’s Saturday, 7:30pm start time. We start the show… And the stream instantly shits the bed. Like we go from full gigabit upload speed, to less than a single megabit. We’re lucky to get 56kbps speeds. We’re getting one or two frames per second if we’re lucky.
Sunday, we test the stream ahead of time, and it works flawlessly. Show starts, and the upload speed drops to fucking dial up.
Monday morning rolls around, and IT strolls in to check their tickets. Sees a hundred from us, and gives us a call. They run a test on their end. No issues. They run a test on AWS. No issues. They run a test on the fiber backbone between the theater and city hall. No issues. They call the ISP. ISP said they didn’t have any issues over the weekend. IT shrugs, and marks the tickets as solved.
Next weekend, same thing. We’re wondering if IT is automatically throttling us, or if we have a malicious user on the network. We’re asking about QoS, or maybe automatic port control kicking in when the stream starts. Monday rolls around, and IT marks it as solved again.
Third weekend, same thing. This time, the city manager’s office is getting calls from angry patrons who paid for streaming and can’t watch their streams. Monday morning, IT rolls up. They run some more tests, and still can’t find anything wrong. They swear up and down that it’s nothing on their end, and it must be something on ours.
After four months of this back and forth, IT finally admits that they have all of their maintenance tasks to run at 7:30 over the weekend. Every single computer, server, and fucking toaster connected to the city network begins their updates at exactly 7:30. Thousands of city devices, all singularly focused on devouring our upload speeds. Servers run off-site backups. Those backups consume all of the upload speeds for the entire city network. IT refuses to change the time, because “this is what works for us. It’s after city hall closes, so we don’t have any users who are affected. It hasn’t been a problem in the past.”
And in those four months, did no-one think of firing up WireShark to see what was floating across that network during that time period?
Seems like someone dropped the debug/analysis ball…
As someone in IT, the answer is in the comment.
So nobody was ever in the office and nobody on the team wanted to stay (I’m guessing here) 2.5 hrs after work to actually do any troubleshooting and because it was never a problem during office hours then who cares
what can you expect, they’re probably getting paid 40-50% of what they should be getting paid.
pay less get less.
my pride as an IT worker wouldn’t have allowed me to let it fester for 18 weeks though.
I wasn’t in IT, so my hands were tied. If I tried running a network scan, I’d have been able to hear the screeching all the way from city hall.
Pro tip: don’t buy a fucking BBQ that connects to the Internet.
No appliances in general while we’re at it
Seriously. “Start it a day early” My brother in Christ why does your grill need wifi? Do you get updates when the steak is ready? Can it flip your burger?!
Have tons of devices that can connect to the Internet. Apparently I’m the only one here resourceful enough to not connect them
I rip the wifi card out and if that’s not available all things can be solved with the proper application of an angle grinder.
Tuesday is the perfect day for it. Finish up the update on Friday, review it Monday and fix where you probably fucked up something and didn’t notice, push it the next day.
I get it. I hate it, but I get it.
another pro tip from someone else in IT: see that appliance with the digital screen? fuck it. don’t get it. get the old shitty one that’s $800 less that doesn’t have WiFi or non-tactile buttons. you know what doesn’t need firmware updates? a charcoal Weber grill.
Pro tip; use electronics that are stable and user focused.
Good shout on patch tues tho.