Claiming that GTA is responsible for mass shootings is an example of what pro-gun activists do in order to deflect the blame off of guns.

If the instance or community guidelines state “X isn’t allowed,” then it isn’t censorship to remove X. It becomes censorship when mods start removing things for reasons other than enforcing instance or community guidelines. Until that point, it’s just content moderation.

If the c/Androids community guidelines state that “This community is about human-like robots. Posts regarding the phone OS are unwelcome” and a mod removes such a post, that isn’t censorship. Likewise for spam, or reposts, or any number of other things.

On the other hand if the mods remove a post about a human-like robot built in China because they’re sinophobic, that is censorship. Likewise if the human-like robot was built by Tesla, if the lead engineer were a woman, or anything along those lines. Likewise if the post were instead critical of such a robot - still censorship (unless it’s a news only community and the post was free text or a meme).

Likewise if a community’s guidelines state that controversial statements without reputable sources backing them up, statements known to be false, or statements that have been flagged as false by a fact checker are prohibited, then removing such statements isn’t censorship. It’s moderation.

You don’t have a moral or ethical obligation to respect their terms, but I wouldn’t go too wild with it, as using a ton of data might get noticed and fixed, causing someone else who’s benefiting from this and who can’t afford a replacement setup to lose it.

In fact, Redot has had 13 releases since the project started late last year.

With an absolutely massive number of commits since then.

An absolutely massive number of commits that were originally made to Godot, sure. Redot has 118 more commits than Godot as of the time of this writing (76,344 vs 76,266). That’s not even 1 original commit per day.

I genuinely don’t understand why people here are taking it so hard that I wish the Immich devs were using semver.

Because you didn’t say that; you said “Breaking changes in a point release? Not cool” and later “I’m basing this off the guidelines at semver.org.”

I’m paraphrasing your comments from memory, to be clear, so apologies if I misquoted you.

It certainly felt to me like you were assuming that this project was using semver and was not following it well, not that you wouldn’t want to use a project that receives this many breaking changes / that doesn’t follow semver. Those complaints both make a lot more sense to me - and I’ve seen many people say similar things about Immich in the past. In fact, it’s a big part of why I haven’t migrated from Photoprism to Immich myself - in this regard they’re complete opposites.

I don’t think there’s any room to argue that announcing a 1.x with a change the developers say is a breaking change, which is what Immich have done, fits within the semver.org guidelines.

That wasn’t the argument.

Following semver is optional. If a project doesn’t explicitly state it is following semver, it shouldn’t be assumed that it is. With regard to Immich in particular, a cursory review of their documentation makes it clear that they are not following semver. Literally, go to https://immich.app/ and read the text at the very top of the page:

⚠️ The project is under very active development. Expect bugs and changes.

Go to the repo and you’ll see the README, which states at the very top:

• ⚠️ The project is under very activedevelopment.
• ⚠️ Expect bugs and breaking changes.

If you can read that, see that they’re on major version 1 with a minor version over 100, and you still think they’re using semver, then that’s on you.

The devs have stated they won’t be using semver until they consider Immich production ready, and that moving to a 1.x version from 0.x was a mistake made some time ago. If you want to think about it as though it is semver, consider the major version to still be 0. See https://github.com/immich-app/immich/discussions/5086#discussioncomment-7593227 for example.

As this project is clearly not following semver, the semver guidelines aren’t applicable and haven’t been violated.

I don’t think there’s any room to argue

Even if semver were applicable, in this case, I would still disagree. The text from semver.org states:

8. Major version X (X.y.z | X > 0) MUST be incremented if any backward incompatible changes are introduced to the public API.

It doesn’t state that any backward incompatible changes, period, require a major version increase, only changes to the public API. I would personally argue that the deployment configuration is part of the public API, but not all project owners agree with me. Even if they do agree, they might say that this was not a documented deployment configuration and thus not part of the public API, and that it therefore doesn’t necessitate an increase to the major version, but as they knew that people were using that configuration, anyway, they included a note about a potentially breaking change as a courtesy to those users.

Immich isn’t a library (the main use case for semver is dependencies that will be pulled into other projects) and as far as I know they don’t state that they use semver.

Certainly the latter.

I have pretty decent insurance through work, but if I’m picking up a prescription, it’s cheaper for me to say I don’t have insurance and use a free discount card (like GoodRx) than to use my insurance. We’re talking $150-$200 for one prescription (a one month supply) with insurance vs $30 without.

To be fair, I have an HDHP with an HSA so my insurance is only supposed to negotiate a discount until I hit the deductible, rather than paying for it. Full price is $200-$250, I think? (I get generics and each generic variant has a slightly different price.) So technically they’re providing a discount, just not a very good one.

Insurance also likes to require a “prior authorization,” which was always a fun surprise after making it through the pharmacy line. That normally takes a couple days to resolve, at minimum, and sometimes longer. If you’re not familiar with prior auths, it’s basically when the insurance company says “Hey doc, can you justify why you’re prescribing this and answer these eight questions?” and then they have someone without a medical degree review the answer and see if it’s good enough.

The only downside to paying out of pocket with a discount card is that the $30 doesn’t go toward my deductible. But since my deductible is multiple thousands of dollars, unless something else happens during the year, I won’t hit my deductible off the $150-$200 prescriptions + regular doctor visits alone. But that’s at most $360 out of pocket that wouldn’t have gone toward the deductible, assuming I had a health crisis in December, vs $1440-$2040 saved if I don’t.

X-rays are even worse, because you’re not told the price ahead of time.

I’m a millennial and I did it more than once on hardware older than I was, but because I wanted to, not because there were no other options.

There have been so many places in front end web dev that used the abbreviation “a11y” without defining it (or explaining the 11) that for years I assumed it was just the name of a particular library that had gotten Kleenexed.

(To be clear, I’m using “Kleenexed” as a verb here to mean “genericized explosively, as if a sneeze.”)

It didn’t help to look at the code, either. “Okay cool, so all this does is add a bunch of random extra tags to the DOM? Doesn’t seem super useful but okay, I guess there’s probably some tool out there that depends on them but we probably don’t use it.”

Illegal vote suppression elected Trump, but even if it hadn’t, you should blame Democrats before blaming people who voted for third party candidates. Now, if you’re talking about people who “protest voted” by voting for Trump (in both the primaries and the election), then sure. Those people did, in fact, play an instrumental part in electing him.

Why blame Democrats? Well, beyond just kinda being Republican-lites:

• for opposing ranked choice voting (and alternatives)
• for not rallying around progressive candidates
• for not choosing Kamala via primary elections in 2024

Democrats are the bare minimum “harm reduction” party, and I don’t bare any ill will toward people who voted for them rather than a party that would actually try to effect change, but the opposite mindset - blaming third party voters for not voting for Democrats - is very shortsighted. And as third party voters have never had the power to enact RCV or STAR voting or otherwise improve the system, blaming them instead of the Democrats who have had that power is inane.

I’ve voted for a Democrat every single presidential election that I’ve been able to, but I honestly wish I hadn’t. I’d much rather there be more visibility for third parties, and for more people to feel empowered to vote for third party candidates.

I don’t use my Windows 10 desktop a ton, but I’ve definitely gotten the full page “Update to Windows 11” screen a few times, and it has Windows 10 Pro installed.

Sure, just be aware that unripe tomatoes (not just the stems) are also toxic to cats.

You can’t just consider the cheese! You gotta look up all the ingredients!

• https://www.cancateat.food/food/bread
• https://www.cancateat.food/food/lettuce
• https://www.cancateat.food/food/tomato
• https://www.cancateat.food/food/mayonnaise
• https://www.cancateat.food/food/beef
• https://www.cancateat.food/food/cheese

Consensus: hold the tomato! Otherwise, if there’s no seasoning, everything else is acceptable in small amounts.

I’m lucky enough to be able to budget for things I want. If it’s in the budget, no justification is required. If it’s in the budget but expensive, then I just have to figure out if I want it more than the other things I want (or will want) that I won’t be able to afford as a result.

I hate how much I agree with you in principle and how ugly it looks in practice. With doubled periods, at least - different marks don’t trigger that same reaction. For example, a question mark inside, followed by a period or comma outside feels right.

It’s not grammatically incorrect to end a sentence with a preposition. It’s a common misconception that it is a rule, basically because one guy argued in favor of it back in the 1600s and had some support for formal writing in the 1700s. But it’s never been a broad rule, and even in formal contexts it’s not a rule in any current, reputable style or usage guides (so far as I know, at least).

Some more info on the topic: https://www.merriam-webster.com/grammar/prepositions-ending-a-sentence-with

Glaring doesn’t imply a negative meaning. In this case it’s used to mean “obvious”.

Unless you’re suggesting that “glaring” means “obviously staring” (it doesn’t - that would be “glaringly staring”) this doesn’t make any sense.

“[He’s] glaring at [direct object]” is an example of a sentence that uses the present participle form of the verb “glare,” which explicitly communicates anger or fierceness.

If you’re not convinced, read on.

—————

The verb form that takes an object is:

Glare (verb with object): to express with a glare. They glared their anger at each other

The noun form the above definition references is:

Glare (noun): a fiercely or angrily piercing stare.

“Glaring” can be an adjective and one of those definitions does mean “obvious” or “conspicuous,” but the use of that form of the word doesn’t make sense in her sentence. Think about a comparable sentence like “The undercover operative is conspicuous at the bar,” where the bar is the location. (Even then, most people wouldn’t use “glaring” in that sentence, as “conspicuous” or “obvious” are much less ambiguous; the operative could be staring piercingly or angrily at the bar rather than being glaring while being at the bar.) Another example that makes a bit more sense is “The effect of the invasive plants is glaring at the park.”

But for that interpretation to be valid here, you’d have to:

• believe that the dude is trying to hide/blend in, or otherwise explain how he - not what he’s doing, but the dude himself - is conspicuous
• believe that the woman’s referring to her own ass as a location
• assume that she isn’t commenting on how the guy is looking at her ass, even though the joke depends on giving him something different to look at

That’s a bit of a stretch.

This is what I would try first. It looks like 1337 is the exposed port, per https://github.com/nightscout/cgm-remote-monitor/blob/master/Dockerfile

x-logging:
  &default-logging
  options:
    max-size: '10m'
    max-file: '5'
  driver: json-file

services:
  mongo:
    image: mongo:4.4
    volumes:
      - ${NS_MONGO_DATA_DIR:-./mongo-data}:/data/db:cached
    logging: *default-logging

  nightscout:
    image: nightscout/cgm-remote-monitor:latest
    container_name: nightscout
    restart: always
    depends_on:
      - mongo
    logging: *default-logging
    ports:
      - 1337:1337
    environment:
      ### Variables for the container
      NODE_ENV: production
      TZ: [removed]

      ### Overridden variables for Docker Compose setup
      # The `nightscout` service can use HTTP, because we use `nginx` to serve the HTTPS
      # and manage TLS certificates
      INSECURE_USE_HTTP: 'true'

      # For all other settings, please refer to the Environment section of the README
      ### Required variables
      # MONGO_CONNECTION - The connection string for your Mongo database.
      # Something like mongodb://sally:[email protected]:99999/nightscout
      # The default connects to the `mongo` included in this docker-compose file.
      # If you change it, you probably also want to comment out the entire `mongo` service block
      # and `depends_on` block above.
      MONGO_CONNECTION: mongodb://mongo:27017/nightscout

      # API_SECRET - A secret passphrase that must be at least 12 characters long.
      API_SECRET: [removed]

      ### Features
      # ENABLE - Used to enable optional features, expects a space delimited list, such as: careportal rawbg iob
      # See https://github.com/nightscout/cgm-remote-monitor#plugins for details
      ENABLE: careportal rawbg iob

      # AUTH_DEFAULT_ROLES (readable) - possible values readable, denied, or any valid role name.
      # When readable, anyone can view Nightscout without a token. Setting it to denied will require
      # a token from every visit, using status-only will enable api-secret based login.
      AUTH_DEFAULT_ROLES: denied

      # For all other settings, please refer to the Environment section of the README
      # https://github.com/nightscout/cgm-remote-monitor#environment

To run it with Nginx instead of Traefik, you need to figure out what port Nightscout’s web server runs on, then expose that port, e.g.,

services:
  nightscout:
    ports:
      - 3000:3000

You can remove the labels as those are used by Traefik, as well as the Traefik service itself.

Then just point Nginx to that port (e.g., 3000) on your local machine.

—-

Traefik has to know the port, too, but it will auto detect the port that a local Docker service is running on. It looks like your config is relying on that feature as I don’t see the label that explicitly specifies the port.