I’ve been using Cura as a slicer for my Anycubic Kobra since I got it a few months ago. After a few weeks I discovered octoprint which was amazing as it let me start and monitor print jobs whilst out and about.

Cura has been great for me but I’m growing tired of needing to copy my print profiles from machine to machine on different OSes to slice my STL files. Is anyone aware of any self hosted web based slicers I could use to sidestep this problem?

I would be willing to live without an octoprint plugin and manually download and upload the gcode files to my printer if needed, I just want to be able to slice from wherever I am and kick off the print from wherever I am.

Any advice would be greatly appreciated.

  • thomasloven@lemmy.worldEnglish
    1·
    11 months ago
    version: "3.0"

networks:
  web:
    external: true

services:
  prusaslicer:
    image: keyglitch/prusaslicer
    volumes:
      - share:/home/slic3r/share:z
      - ./slic3r:/home/slic3r
    depends_on:
      - novnc
    environment:
      DISPLAY: novnc:0.0
      WIDTH: 1920
      HEIGHT: 1080
    entrypoint: ""
    command: 
      - /bin/sh
      - -c
      - /bin/sleep 3 && /Slic3r/slic3r-dist/prusa-slicer

  novnc:
    image: theasp/novnc:latest
    networks:
      web:
      default:
    environment:
      RUN_XTERM: "yes"
      RUN_FLUXBOX: "yes"
      DISPLAY_WIDTH: 1920
      DISPLAY_HEIGHT: 1080
    labels:
      traefik.enable: true
      traefik.docker.network: web
      traefik.http.routers.slicer.rule: Host(`slicer.myurl.com`)
      traefik.http.routers.slicer.tls.certResolver: le
      traefik.http.routers.slicer.middlewares: auth@file

    You’ll have to add something to be able to transfer files to the share volume separately. I use machines/filestash and dperson/samba.

    • Nimmo@lem.nimmog.ukOPEnglish
      1·
      11 months ago

      Thanks for that, I’ll give it a tweak and a bash as I don’t use traefik, but that’s a great starting point that gets me a chunk of the way there

      • thomasloven@lemmy.worldEnglish
        1·
        11 months ago

        You should be able to just expose port 8080 from novnc and be good to go, I guess. And then you don’t need the networks stuff either.