I just did my very first TPU print after years of printing PLA and PETG, and I’ve gotta say: That stuff sticks like a mofo on the textured PEI plate…!!
The print turned out great and the default profile in BS needed very little tweaking.
I’m currently using Fiberology MattFlex 40D.

What do you guys use to ease the removal?
I’ve seen normal glue sticks, IPA and liquid glue made for 3D printing, but I figured it would be cool to ask the fine people here.

If you do use glue: Do you stick with a smooth PEI or maybe something else?

All feedback is appreciated!

Thanks in advance!

  • squaresinger@lemmy.worldEnglish
    2·
    2 days ago

    Turn off the heat on the hotbed. TPU doesn’t need it, and it makes removal much easier if you don’t heat the hotbed.

    Also reduces the amount the printer heats your room by 90% or so.

    • Bronzie@sh.itjust.worksOPEnglish
      2·
      2 days ago

      I was already running at 30°C, but appreciate the advice nonetheless!
      I’ll try completely off next time

        • Bronzie@sh.itjust.worksOPEnglish
          1·
          10 hours ago

          You have my deepest condolances.

          Come to the Nordics for a coolcation next year, but stay safe untill the heat wave passes my friend!

          • Gumus@lemmy.worldEnglish
            1·
            8 hours ago

            I made a trip all the way to Svalbard last summer and it was amazing. I seriously considered looking for a cabin somewhere in Norway countryside and moving there may-september every year.